The solution to stripped out microphone shock mount tensioning screws.


Most shock mounts are made in China and over time the tensioning screw strips because of the inexpensive metals used. The SMK1 is made in the USA and solves your limp shock mount problems.

RCA 5840/ EF732 Tube. Tested in actual microphone.


$20.

Mullard EF80. Tested in actual microphone.


$25.

Neuhaus EF86. Tested in actual microphone.


$40.

RFT EF86. Tested in actual microphone.


$40.

Siemens EF86 Tube. Tested in actual microphone.


$40.

Tesla EF86 Tube. Tested in actual microphone.


$40.

Tesla EF806S Tube. Tested in actual microphone.


$50.

Valvo Tube. Tested in actual microphone.


$40.

Telefunken EF95. Tested in actual microphone.


$25.

Here is another one I just don’t get. If you want the best sounding tube for your mic wouldn’t you want to buy a tube that has been tested in a mic before you buy the tube? So the tube tests new on the machine but sounds bad in a mic.


So I decided I would test each tube in the mic to save people the hassle and trouble of going through a bunch of noisy tubes.